When Doug Doerr got a call from a Colorado-based landfill operator with a hot gas probe at his site’s boundary, Doerr’s day kicked into high gear. Chasing down gas migration problems is nothing new in an SCS client manager’s life, but that reality makes the job no less complex. And in this scenario, he was dealing with a site that he occasionally got called to visit, so to understand the problem fast, he needed the site’s historical data and the current information to fully picture what was happening.
Doerr started with basic landfill gas information from the client: the monitoring probe’s location and a drawing of the gas collection system to determine where the probe was in relation to the gas system. But as you know, that is one small slice of a king-sized pie.
“All the LFG data that I would typically wade through to identify the problem can be overwhelming, but I had a recourse enabling me to get up to speed quickly. It didn’t take long to assess the problem,” he says. That recourse is a combination of quick teamwork from his peers nationwide and sophisticated technology developed by SCS practitioners for landfill owners and operators.
“I queried our in-house landfill gas technical group (engineers, geotechnical experts, and field personnel). And got over 25 responses within several hours with suggestions, one of which came from Ken Brynda in SCS Field Services, who leveraged DataServices to help me identify and narrow down the potential cause of the problem,” recalls Doerr.
DataServices, a module of the SCS eTools® digital platform, collects, stores, manages and analyzes large volumes of continuously accumulating landfill gas data for individual sites or multiple landfills. The module provides a quick method to view landfill gas scenarios.
The beauty of it is that it generates maps and charts to visualize every well and every probe. These system components are viewed in relation to one another and in relation to the perimeter, where the methane on that Colorado site flowed. Further, SCS Field Services’ landfill gas gurus, such as Ken Brynda, plug-in specific parameters that keep a close watch on any well or a group of wells.
“I logged into DataServices and pulled data from the five wells closest to the hot probe, which showed we had vacuum, flow, and gas quality, indicating the wells were pulling hard enough. I shared the results with our landfill gas technical group responders in a table and range map I’d created. And they started chiming in,” Brynda recalls.
As responders viewed initial results from their respective bases around the country, Brynda churned out more information in a few hours, running point charts to capture the balance gas, methane, flow, temperature, supply vacuum, and the vacuum applied to each well. He looked for trends that narrow down cause and point to solutions.
Eliminating the Possibilities – Rule Out Well System Malfunctions
“It can take days if we’d had to do it the old school way with spreadsheets laid out in a lot of rows. But we could identify the potential problem in a matter of hours, backed by a comprehensive evaluation for the landfill operator in eight hours,” Doerr says.
When Field Services staff work to solve a problem with a probe, they look for an outlier, something from a group of wells that’s not behaving like the other wells. In this case, Brynda determined that the wells near the hot probe were functioning properly. DataServices eliminated potential problems by slicing through and analyzing large chunks of data confirming the system was working efficiently.
Next, we observed that the wells are likely too far away to pull gas back from waste, adjacent to the probe in question, where there are no wells.
“DataServices helped rule out malfunctions, and that’s a big deal because if you can confirm the landfill system is working properly, you have narrowed your focus and can look toward other possibilities, ultimately leading to corrective options,” Doerr says. Brynda and Doerr suggested putting in temporary wells in that area to avoid odor migration and health and safety issues.
Doerr continues watching the situation and is prepared with a several-point action plan to mitigate exceedances and avoid falling out of compliance. “We continue watching the data to ensure the gas collection system continues to function well. Should there be issues again, we’re able to fully identify the gas migration pathways and anything in the system that looks out of the ordinary,” Doerr says.
If the client decides to add wells in time, data from the expanded infrastructure will be added to the app and monitored. “As the number of wells grows, DataServices grows with it, adding any, and as much, monitoring and collection data as the operator wants. DataServices will always be in the background to monitor, collect and analyze LFG data in real-time, whenever we need it,” he says. Being able to store, organize, dissect and analyze unlimited volumes of information from one location is powerful. And not just because it helps operators identify problems as they are happening, but because it and our teams can support them in looking for trends over time. Keeping an eye on the activities that keep the systems in balance is less costly.
For Doerr, who spends time in the field but longer hours with his clients, DataServices and the ability to interact quickly with experts like Brynda help SCS deliver more value to clients. “As much as I’d love to master DataServices, I need to focus all of my time on my clients’ business and goals; having support from Field Services and DataServices makes us all more efficient.”
Landfill Technologies and Comprehensive Expertise
SCS eTools® and SCS DataServices®, now with SCS MobileTools® for viewing data and charts anywhere; available to pull landfill data into DataServices for analyzing. You can customize and focus on exactly what you need fast. As Doug and Ken emphasize, it’s info that you likely already have, but may not be able to use quickly for troubleshooting.
SCS RMC®, remote monitoring and control of landfill equipment and systems.
Comprehensive Landfill Services
